be Creative! MDF Inkpad Storage Kit Instructions
Section A – Semi Circular cut on one side x 3
Section B – Three opened Grooves on one side x 3
Section C – Three Closed Grooves x 2
Section D – Top and Bottom Section x 2
Section E – Backing Section x 1
Assembling your storage unit:
Step 1: Assemble Section A and B, by slotting all the open ended Grooves together
- TOP TIP: The semi-circular cut end facing downwards
Step 2: Put Section C on each end of the stand and make sure the pieces click together.
- TOP TIP: If the pieces do not fit, turn C 180 degrees, protruding edge facing up
Step 3: Place section E on top of the stand and make sure the pieces click together.
- TOP TIP: If the pieces do not fit, turn E 180 degrees.
Step 4: Turn the stand upwards, and the semi-circular cut end should be facing you
Step 5: Place Section D, on top of the stand and click the pieces in place. Repeat for the bottom end.
- TOP TIP: The Rounded end should be facing towards you, and if the pieces do not fit, turn Section D 180 degrees.
Your stand should now look like the above picture – congratulations, you’ve built your stand!
Make sure you get your InkPad Storage kit from Hochanda.
Make sure you watch Hochanda every day 24/7 for lots of fun and crafty demonstrations and inspiration! You can watch Hochanda live online, Sky channel 663 or Freesat 817.